|
UPC Code: 020334017680 
Stampede® 4X4 is bigger and badder than ever with a new clipless body, extended chassis, and huge 5.3″ Sledgehammer® tires for an aggressive monster truck stance. Stampede’s all-new BL-2s™ brushless power system delivers effortless power for all-day fun with an added boost of torque for terrain-shredding burnouts and powerful acceleration. Stampede 4X4 also comes standard with Traxxas’ Extreme Heavy Duty Upgrade Kit to become the new standard for strength and durability.
NEW BL-2S BRUSHLESS POWER SYSTEM
Stampede 4X4’s BL-2s brushless power system ramps up the fun with up to 60% more speed and faster acceleration than comparable brushed power systems. Improved efficiency, high-speed ball bearings, and an internal cooling fan allow Stampede 4X4 to run battery after battery for all-day fun. With no brushes to wear out, the BL-2s 3300 kV is long-lasting and requires virtually no maintenance.
EXTREME HEAVY DUTY UPGRADE KIT
Stampede 4X4’s pre-installed Extreme Heavy Duty Upgrade Kit replaces key drivetrain and suspension components with beefed-up parts made for ultimate strength and durability. From the HD suspension arms to the steel wheel hubs, this is the strongest driveline ever offered in a Stampede.
CLIPLESS BODY MOUNTING
Stampede 4X4 now uses a clipless body latching system for secure mounting and fast, one-handed removal and installation. A rugged internal cage attaches to the body with molded reinforcements to prevent pull-through damage. Tough roof and tailgate skids protect the body in the event of a rollover.
Truck Specs
| Length: |
17.87 inches (454 mm) |
| Width: |
13.10 inches (333 mm) |
| Ground Clearance: |
2.44 inches (62 mm) |
| Weight: |
5.98 pounds (2.7 kg) without batteries |
| Height: |
8.34 inches (212 mm) |
| Wheelbase: |
11.62 inches (295 mm) |
| Front Shock Length: |
3.45 inches (88 mm) - Long |
| Rear Shock Length: |
3.98 inches (101 mm) - XX-long |
| Tires (pre-glued): |
5.3 inches (133 mm) tall Sledgehammer® |
| Wheels: |
2.8 inches (71 mm) graphite gray wheels |
| Speed Control: |
BL-2s™ electronic speed control |
| Motor (electric): |
BL-2s™ 3300 kV sensorless brushless |
| Gear Pitch: |
32 pitch |
| Overall Drive Ratio: |
15.36:1 |
| Differentials: |
Hardened steel bevel, sealed, limited slip |
| Chassis Structure / Material: |
Modular composite tub |
| Brake Type: |
Electronic |
| Drive System: |
Shaft driven 4WD |
| Steering: |
Dual bellcrank with integrated servo saver |
| Radio System: |
TQ™ 2.4 GHz (2-channel) |
| Servo: |
Waterproof 2075 |
| Skill Level: |
1 |
| Battery Compartment (L/W/H): |
162 mm x 47 mm x 26 mm |
| Required Batteries: |
4 “AA” (transmitter), Vehicle (see battery finder) |
Motor Specs
| Type: |
BL-2s 3300 kV sensorless brushless motor |
| Weight: |
7.51 ounces (213 g) |
| Length: |
3.15 inches (80 mm) |
| Diameter: |
1.42 inches (36 mm) |
| Connector Type: |
Traxxas Quick Connect Motor Plug |
ESC Specs
| Input Voltage (cells): |
6-7 Cells NiMH / 2s LiPo |
| Case Size: |
1.53″ (39 mm) x 2.31″ (59 mm) x 1.21″ (31 mm) |
| Weight: |
3.07 ounces (87 g) |
| BEC Voltage: |
6.0 volts |
| Reverse Delay: |
Yes, with lockout |
| Thermal Protection: |
Two-stage thermal shutdown |
| Ports: |
Auxiliary fan |
Features List
- BL-2s™ Waterproof Electronic Speed Control
- Heat sink accepts accessory cooling fan (3340)
- Three Programmable Drive Profiles
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode™ - 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set® one-button setup
- Built-in two-stage low-voltage detection for LiPo batteries
- NiMH battery packs: 6-7 cells (7.2 to 8.4 volts)
- LiPo battery packs: 2 cells (7.4 volts)
- 3300 kV Brushless Motor
- Integrated cooling fan
- Low-maintenance design
- Efficient ball bearings
- 3300 kV
- TQ™ 2.4 GHz Transmitter
- Full-size 2-channel transmitter
- All-day comfort with precise long-range control
- Extreme Heavy-Duty Upgrade Kit Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- Extreme heavy-duty driveshafts
- Oversize diameter
- 6 mm axles
- Steel wheel hexes
- Clipless ProGraphix® Body
- Tough reinforced bumpers
- Reinforced inner cage
- Rugged roof rollover protector
- Tailgate protector
- Holds tight for intense action
- Quick and easy removal
- Chassis
- Modular composite tub design
- Secure battery hold-down latch
- High angle bumpers
- Suspension
- HD-composite suspension arms
- Oil-filled Ultra Shocks
- White powder-coated springs
- Steering
- Chassis-mounted #2075 servo
- Dual bellcrank design with integrated servo saver
- Drivetrain
- Full-time shaft-driven 4-wheel drive
- Oil-filled steel gear front and rear differentials
- Large 32-pitch steel spur gear
- Wheels and Tires
- Large 2.8″ graphite gray wheels
- Tall 5.3″ Sledgehammer® tires
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
What’s In The Box:
- Stampede 4X4 with BL-2s ESC and 3300 kV motor
- Quick Start Guide
- TQ 2.4 GHz radio system
- High quality maintenance tools
What You’ll Need:
- Batteries
Stampede 4X4 requires a single NiMH or LiPo battery.
- Charger
Traxxas EZ-Peak® Live charger (2971) is recommended for easy and fast charging performance
- AA Alkaline Batteries
Four AA alkaline batteries for the transmitter
Model 67154-4: Stampede® 4X4 Brushless: 1/10 scale 4X4 monster truck, fully-assembled, waterproof electronics, Ready-To-Race®, with TQ™ 2.4 GHz 2-channel radio system, BL-2s™ brushless power system, and clipless painted body. Requires: battery and charger. |
News
Shopping Cart
