UPC Code: 605482569467 This is the Dynamite WP FWD/REV 60A Brushed ESC.
Features:
- LiPo and NiMH compatible
- Up to an 8T motor limit
- Crawler running mode
- Waterproof for all weather operation
- Program functions changed with the use of jumper pins
- Removable mounting tabs create an even smaller footprint and allow hard mounting in a wide variety of vehicles
- Pre-wired with EC3 battery connector and RTR compatible motor bullets for easy installation
This brushed, waterproof ESC is LiPo/ NiMH compatible and offers forward/brake/reverse, forward/brake and crawler drive modes. Its compatibility makes it an ideal replacement ESC or the perfect upgrade to your current non-LiPo, non-waterproof, or limited motor spec ESC.
Includes:
One Dynamite WP FWD/REV 60A Brushed ESC
Requires:
Installation onto vehicle
Forward: Yes
Reverse: Yes
Brake: Yes
Time Delay Brake: Yes
Continuous Maximum Current: FWD: 60A REV: 30A
Input Voltage: 2-3S Lipo, 5-9 cells NiMH/NiCd
Input Connector Types: EC3
Output Connector Types: 3.5mm Tamiya style bullet
Motor Limit: 2S Lipo/6cell NiMh >=8T 540/550 closed endbell motors, 3S Lipo/9cell NiMh >=13T 540/550 closed endbell motors
Momentary Peak Current: FWD: 360A REV: 180A
Length: 1.48 in (37.5mm)
Width: 1.46 in (37mm) without tabs, 2.23 in (56.6mm) with tabs
Height: 0.71 in (18mm)
Weight: 1.41 oz (40g)
BEC Voltage: 5V
PWM Frequency: 1KHz
Overload Protection: Yes
Full On Resistance: .0008 ohms
Wire Gauge: 16AWG
Auto Cutoff: Yes |