|
UPC Code: 020334039750 Sledge® 1/8 scale 4WD brushless monster truck. Fully assembled, Ready-To-Race®, with TQi™ 2.4GHz radio system, VXL-6s™ power system, belted Sledgehammer® tires, and ProGraphix® clipless body.
- VXL-6s™ Waterproof Electronic Speed Control
- 6s LiPo compatible
- Integrated cooling fan
- Real-time telemetry via Traxxas Link™
- 3-LED status indicators
- Powered accessory ports
- 10-gauge silicone wire
- Integrated protection circuits
- Velineon® 2000 kV Brushless Motor
- 4-pole 2000 kV
- 5 mm output shaft
- Finned can for better heat dissipation
- Aluminum motor cradle mount
- Supports entire motor length
- Reduces flex for longer gear life
- Up to 70+ mph with Two 3s LiPo Batteries (sold separately)
- Traxxas Stability Management®
- Helps prevents spinouts and loss of control
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
- TQi™ 2.4 GHz High Output Radio System
- TQi 2-channel transmitter
- Traxxas Link enabled
- 2.4 GHz 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models—just switch on and drive, “model selection” is not required
- Programmable Multi-Function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity (exponential)
- Drivetrain
- Full-time 4-wheel drive
- Heavy-duty steel driveshafts
- Large 8 mm steel stub axles
- Steel dogbone center driveline
- Protective rubber boots on differential inputs
- Transmission
- Mod-1 pinion and spur gears
- Fixed gear mesh system
- Torque-Biasing Center Drive
- Differentials
- Heavy-duty sealed 4-gear design
- Large scale steel ring and pinion gears
- Large 8 mm output shafts
- Steel drive cups
- Easy access bulkheads
- GT-Maxx®Shocks
- Longer rear shocks for more travel
- Machined aluminum threaded body
- Extra-large bore and capacity
- Large-diameter damper shaft
- Lower seal cartridge with dual X-rings
- Height-adjustable spring retainer
- Lower spring perches bolted on
- Suspension
- Thick 5 mm 6061-T6 aluminum shock towers
- Ultra-tough composite arms
- Made from our strongest cold-weather material
- Molded insert for clean look
- Rear rock deflectors
- Press-in hinge pins to reduce play
- Oversize molded toe and camber links
- Heavy-duty C-hubs with oversize bearings
- Multiple mounting points for suspension tuning
- Chassis
- 3.2 mm ribbed aluminum chassis
- Formed edges for improved strength
- Thick aluminum T-Bar™ for added rigidity
- High-strength buttressing on shock towers
- Rugged locking battery compartment with quick-release door
- Low-CG design for improved handling
- Interlocking components for tight tolerances
- Tough front and rear bumpers double as skid plates
- Hidden wire management for clean appearance
- Clipless ProGraphix® Body
- One-handed clipless body mounting system
- Rigid internal frame
- Molded body reinforcements for tear-through protection
- Protective roof skids
- Rugged high-downforce rear wing
- Steering
- Waterproof 2275 metal gear servo
- High-throw bellcrank steering design
- Heavy-duty servo saver with aluminum posts
- Metal servo horn
- Wheels and Tires
- Huge 6.7″ Sledgehammer all-terrain tires
- Belted carcass resists ballooning
- Tough 3.8″ black wheels
- Splined 17 mm aluminum axle hubs
Model Specs
| Model Name: |
Sledge Belted |
| Model Type: |
Monster Truck |
| Model Speed: |
70+ mph with 6s LiPo battery and optional gearing |
| Model Skill Level: |
4 |
| Scale: |
1/8 |
| Weight: |
12.74 lbs (5.77 kg) |
| Length: |
23.78 inches (604 mm including wing) |
| Width: |
18.10 inches (459 mm) |
| Front Track: |
18.10 inches (459 mm) |
| Rear Track: |
18.10 inches (459 mm) |
| Height: |
8.43 inches (214 mm) |
| Wheelbase: |
15.10 inches (384 mm) |
| Center Ground Clearance: |
1.95 inches (50 mm) |
| Drivetrain: |
Shaft-driven 4WD |
| Transmission: |
Single speed |
| Differential Type: |
Sealed, hardened steel bevel, limited slip |
| Gear Pitch: |
1.0 metric pitch |
| Servo(s): |
2275 digital metal-gear waterproof (347 oz-in) |
| Radio System: |
TQi™ 2.4 GHz 2-channel transmitter with TSM® receiver |
| Battery Compartment Specs: |
181 mm X 54 mm X 45 mm |
Motor Specs
| Motor Name: |
4-pole 2000 kV |
| Motor Type: |
2000 kV sensorless brushless |
| Motor Weight: |
14.32 oz (406 g) |
| Motor Length: |
2.97 inches (76 mm) |
| Motor Diameter: |
1.65 inches (42 mm) |
| Motor Shaft Size: |
5 mm |
| Motor Connector Type: |
Traxxas 6.5 mm bullet connectors |
ESC Specs
| ESC Name: |
VXL-6s |
| ESC Type: |
Brushless |
| ESC Case Size: |
2.28” (58 mm) x 2.83” (72 mm) x 1.81” (46 mm) |
| ESC Weight: |
7.30 oz (207 g) |
| Motor Connectors: |
6.5 mm bullet connectors |
| Battery Connectors: |
Traxxas High-Current Connectors |
|
News
Shopping Cart
