Castle Creations 1/10 Mamba Max Pro SC System 2400 kV
This is the Castle Creations 1/10 scale Mamba Max Pro Speed Control System with a 2400 kV Sensorless Brushless Motor.
Rated for a 4S max. input
Great for use with stock gearing on all wheel drive (AWD) vehicles in basher applications
Switching BEC provides power for both the servo and receiver all the way to 6S
Custom design profiles on a PC with the Castle Link PC programming software (not included, requires the Castle Link Quick Connect, CSEM7900 and the Quick Field Programmer, CSEM6300)
Infinitely adjustable brake and throttle curves, with timing advance
Punch Control allows for dialing in horsepower when needed
Brake Strength allows straight tracking under hard braking
Drag Brake helps entry into corners
Start Power for smoother launches
Four pole motor
Replaces 550 size motors
Powerful 2400kV motor
Short Course Trucks are one of the hottest segments in RC surface these days, and Castle Creations reigns supreme at making unbelievable upgrades that actually improve reliability and give you insane speed.
Castle Creations is proud to bring the Neu-Castle 1415-2400kv motor and Mamba Max Pro SCT ESC combo to racers who want to go to the next level in reliability and speed beyond the stock brushless setup.
The Castle Creations Mamba Max Pro SCT is designed for speed, and it's a torque monster; it cal dig you out of tall grass, sand- you name it.
Castle Creations’s Neu-Castle 1415 motor bolts directly in, plus the ESC wires are ready for you to connect to the motor. Simply add your battery connector to the ESC and you're ready to rip.
Mamba Max Pro SCT Edition ESC
Neu-Castle 1415 2400 kV motor
CC Blower fan shroud
Requires: Installing in vehicle
Note: Not for use in 1/10 scale monster trucks
Electronic Speed Control
Cells: 6-12 NiCd/NiMH, 2-6 cell LiPo
Reversible: Yes, with lockout
Low Voltage Cut-off: Programmable
Size: 45.5mm x 36.5 x 21.5mm (1.79"x1.44"x0.85")
Weight: 81g (2.8oz)
2400 kV Motor
Input Voltage: Max of 5S LiPo (14.8V) or 14 cell NiCd/NiMH (16.8V)
Length: 2.7" (69.5mm)
Diameter: 1.4" (36mm)
Weight: 10.6oz (301.5g)
Shaft Diameter: 1/8" (3.715mm)
Connector Type: 4mm bullet type connector
Motor Wire Length: 4" leads (101mm)