|
UPC Code: 007336201002 QUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE™ shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE™ is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CURE™ can be handled after 15 minutes. Full strength is reached in 1 hour.
Works Best On:
Works Good On:
- Balsa Wood
- Soft Wood
- Fiberglass
- Ceramics
- Hard Plastics
- White Foam
- Reinforcing
Directions:
QUIK-CURE™ 5 min. Epoxy is an equal two-part hobby adhesive that forms high strength bonds through a chemical reaction between the resin and hardener. The cured epoxy is resistant to most chemicals.
QUIK-CURE™ is the least temperature sensitive of our epoxies. It will cure in temperatures down to 40?F. Temperatures above 90?F shorten the working time before the epoxy begins to set up from 5 to less than 4 minutes.
QUIK-CURE™ bonds best to clean, textured surfaces. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Acetone and Isopropyl rubbing alcohol work as the best solvents for cleaning uncured epoxy from surfaces. QUIK-CURE’S™ lack of brittleness allows it to form lasting bonds on materials as different as balsa wood and glass; however, it is not recommended for areas subject to long-term immersion in water. Cured QUIK-CURE™ can be coated with polyester resin without affecting the curing of the resin. Full cure in less than 15 minutes.
Safety Data Sheet:
http://www.bsi-inc.com/hobby/quik_cure.html |
News
Shopping Cart
